Belton, MO Fire Damage Cleanup and Restoration

Fire Damage and Safety in Belton, MO

Space heaters are notorious in starting fires in offices and homes. The dust and hair from every day start to collect on and in the heater. Once gummed up it becomes a fire hazard and can start on fire. If you are lucky it will only burn up a bit causing smoke and foul odor. SERVPRO of Harrisonville/Belton/Raymore can easily take care of smoke damage with wall washing and deodorization. If the space heater is under a desk or next to furniture, there could be a lot more damage. Water could be all over the home due to the firefighters and water can be all over the facility because of the fire suppression system. Whichever the case, SERVPRO can provide the cleanup.

SERVPRO of Harrisonville / Belton / Raymore

Fire, Smoke, or Soot Damage? Call Today (816) 884-2240

24-Hour Emergency Fire Restoration Service

We know that fire damage can happen any time, so we’re ready to respond 24 hours, 7 days a week—including holidays. We provide immediate emergency fire services for Belton homes or businesses, day or night.

Faster to Any Size Fire Emergency

When fire and water damage strikes, a fast response is critical. We’re dedicated to responding immediately day or night to your Belton home or business. A faster response helps to prevent secondary damage and helps to reduce cost.

Locally Owned, with National Resources

We live and work in this community too; we might even be neighbors. As a locally owned and operated business, SERVPRO of Harrisonville / Belton / Raymore is close by and ready to respond to your fire damage emergency. We are proud to be an active member of the Belton community and want to pitch in and help make our community the best it can be.

We are proud to serve our local communities:

Highly Trained Water and Fire Restoration Specialists

As water and fire damage specialists, we have the experience, the expertise, and the advanced training that enables us to get your property restored quickly and thoroughly. Learn about our fire damage training/certificates.

Our Fire Restoration Process

Every fire damage event is a little different and requires a unique solution, but the general process stays the same. The steps listed below illustrate our process for the “typical” fire damage emergency.

Step 1: Emergency Contact

The fire restoration process begins when you call us. Our consultant will guide you through the crisis and may ask several questions to help us better understand the type of fire damage you experienced, determining the equipment and resources needed.

Step 2: Inspection and Fire Damage Assessment

We carefully inspect and test adjoining rooms of your property to determine the extent of the fire, smoke, and soot damage. This step is crucial to developing a plan of action.

Step 3: Immediate Board-Up and Roof-Tarp Service (if needed)

In many fire damage cases, it’s necessary to board up missing windows and walls and to place tarps on a damaged roof. This helps to maintain security and to protect against further damage. 

Step 4: Water Removal and Drying (if water damage is present)

The water removal process begins almost immediately and removes the majority of the water. We then use dehumidifiers and air movers to remove the remaining water and complete the drying process. 

Step 5: Removal of Smoke and Soot from All Surfaces

Your property’s ceiling, walls, floors, and other surfaces will likely have smoke and soot residue. We’ll use specialized cleaning products, equipment, and techniques to properly clean your home or business. 

Step 6: Cleaning and Sanitizing

Any restorable items will be cleaned and sanitized. We’ll use a variety of specialized cleaning techniques to restore your belongings to pre-fire condition. Our professionals will also remove smoke and other odors using advanced air scrubbing equipment and fogging devices with deodorizers.

Step 7: Restoration

Restoration is the final step—getting your home or business to its pre-fire condition. Restoration may involve minor repairs, such as replacing drywall, painting, and installing new carpet; or it may entail major repairs such as the reconstruction of various areas or rooms in a home or business.

Trusted Fire Restoration Leaders

When fire and smoke damage your Belton, MO property, you can trust SERVPRO of Harrisonville / Belton / Raymore to restore your home or business back to its original state. We understand that fire doesn’t just damage your home, but also causes emotional distress as well. Trained SERVPRO franchise professionals will talk to you through the entire restoration process, and work hard to get you back into your property soon.

Call (816) 884-2240 - We are ready to start restoring your home to pre-fire condition.